IDRS 1000 V2 Firmware Upgrade
Please read carefully and Print out these instructions::
1. Download to your desktop the compressed files (.ZIP) of the latest firmware from this page. http://www.stableimaging.com/v1/support/firmware_IDRS_1000.html
2. Extract (UnZip) the .ZIP file to your desktop.
3. Copy UnZipped files to the root directory of the SD card (Do not copy files to a folder on the SD card)
Copy these UnZipped files to your blank SD card:
MACMF200.UPD
MAF200LM.UPD
UPF200LM.UPD
4. Insert the SD card into the IDRS 1000
5. Plug in your IDRS 1000 to the supplied AC Power Adapter
5. Power on the unit.
6. Go to the SETUP Menu in the IDRS 1000.
7. Select “Firmware Upgrade” in the SETUP Menu.
8. To start Firmware Upgrade, press OK
9. To check if the upgrade is successful, please check the firmware version number displayed on the “Firmware Upgrade Options” screen.
Important Notes:
1. You must use a SD Card 1GB or less, formatted as Windows FAT 16 or FAT 32 via your PC or IDRS 1000. (Make sure the SD card doesn't have any files or file folders on the disk, you must empty your Recycle Bin or Trash Can to completely remove the files from the SD card.)
2. Important: Your IDRS 1000 must be plugged into the supplied AC Power Adapter. Do not unplug, shutdown, or restart your IDRS 1000 while the update is taking place. Interrupting a firmware update can render your IDRS 1000 unusable.
3. If the upgrade was successful, the new firmware version will be displayed. If the upgrade was not successful, the firmware version will remain as the previous version.
Do NOT send an original firmware file format via Internet. Otherwise the file is very likely to become corrupted and if used for upgrade it will damage the IDRS 1000
IDRS 1000 V2:: (2007-03-14 V2.0.3.4)
Firmware (ZIP 3.4MB):
IDRS 1000 V2.0.3.4 Firmware ZIP file  |